http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for block type emifil r used for general electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > block type emifil r (lc combined) > smd type bnx022 12.1 0.2 9.1 0.2 1.6 0.3 4.2 0.3 (2.45) 1.3 0.2 0.3 0.1 0.3 0.1 7.0 0.2 2.5 0.2 1.55 0.2 1.55 0.2 1.0 0.3 3.1 0.2 1.05 0.2 (1) (2) (3) (4) (1) (3) (4) (2) (4) (4) (1) (3) (4) (2) (in mm) : electrode frequency (mhz) insertion loss (db) 1 10 100 0 20 40 60 80 100 0.1 1000 bnx022-01 bnx023-01 l2 c2 l1 l3 c1 b psg cb cg (1)-(4): terminal number psg: power supply ground cg: circuit ground cb: circuit+b (1) (2) (3) (4) block type emifil r (lc combined) smd type bnx02* series dimensions insertion loss characteristics (main items) equivalent circuit packaging code packaging minimum quantity l 180mm embossed tape 400 k 330mm embossed tape 1500 b bulk(bag) 100 rated value ( p : packaging code) part number rated voltage withstand voltage rated current insulation resistance(min.) insertion loss bnx022-01 p 50vdc 125vdc 10a 500m ohm 1mhz to 1ghz:35db min. (20 to 25 degrees c line impedance=50 ohm) bnx023-01 p 100vdc 250vdc 15a 500m ohm 1mhz to 1ghz:35db min. (20 to 25 degrees c line impedance=50 ohm) operating temperature range: -40 c to +125 c in operating temperatures exceeding +85 c, derating of current is necessary. continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for block type emifil r used for general electronics equipment for your design. 2009.5.1 in operating temperatures exceeding +85 c, derating of current is necessary for bnx022 series. please apply the derating curve shown in chart according to the operating temperature. 10 0 1 85 -40 125 operating temperature ( c) derated current (a) derating in operating temperatures exceeding +85 c, derating of current is necessary for bnx023 series. please apply the derating curve shown in chart according to the operating temperature. 15 0 1 85 -40 125 operating temperature ( c) derated current (a) derating noise suppression products/emi suppression filters > block type emifil r (lc combined) > smd type derating of rated current derating of rated current do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. ! caution (rating)
|
